Waterborne paint system improves flash and cure times by increasing air velocity within the paint booths from cross direction of downdraft air.The waterborne paint system can be easily installed to any type of spray booth or size in a matter of hours.
The use of water-based paint has gained popularity due to its environmental benefits, as it emits fewer volatile organic compounds (VOCs) compared to traditional solvent-based paints. To ensure optimal performance and compliance with environmental regulations, it is important to have a dedicated water-based paint spray booth.
Item No.:
Car Spray BoothPayment:
L/C TTColor:
Orange Blue Red WhiteShipping port:
Shenzhen/GuangzhouLead Time:
7 days after receiving depositWater-based paint spray Booth features:
Waterborne paint booths typically reduces flash times by 50% or more and shortens curing times by 30-50% thus saving large amounts of fuel and electricity,improve production increase efficiencies, and improve your bottom line.
--Body & basement:
Wall panel: sandwich style, δ=50mm, rock wool. (Polystyrene is optional)
Basement: steel structure, full grids,ramp: 2 pcs of grids.
Door: 3 pcs of front door without aluminum side cover. 1pcs of emergency door with pressure lock.
--Fans & ducts:
One 11kw intake fan and one 11kw exhaust fan.
Water soluble paint with hot-air acceleration system: 1set
4m straight exhaust ducts, one 90° bend, and one 60° bend.5m straight chimney and 2 small bends.
1 manual VCD exhaust damper, electrical VCD as optional. one pressure meter.
Spraying/baking transition damper, automatically air controlled.
--Heat & filter:
Heat exchanger: stainless steel. RIELLO/ RG5S burner.
Roof filter: 6 pcs of filter, mounted above support frame, which is made of steel and powder coated.
5 pcs of floor filter and 2 pcs of air mouth filter.
--LED Light & control box:
Upper light: 10 sets, 4*18w per set. side lights: 8sets, 4*18w.
Control box: imported components, overload, overheat, phase-lacking, phase-lacking protection,
engine Y/△ start.
Automatically stop when preset time is up.
Constant temperature spraying.
Technical Specifications | GL7-CE |
External size(m)(LxWxH) | 7.0×5.6×4.0 |
Internal size(m)(LxWxH) | 6.9×3.9×2.7 |
Door width(m) | 3.0 |
Door height(m) | 2.66 |
Air flow (m3/h) | 30000 |
Inside no-load air speed(m/s) | 0.3-0.5 |
Power (kw) | 26 |
Vehicle suited | Saloon car |
Environmental protection Device | As optional |
WATERBORNE PAINT DEVICE
On the basis of common oil-based paint booth, we adopt air acceleration system to speed up the drying time of waterborne and solvent-based paints and to increase the productivity. Waterborne paint booth is equipped with four 0.75kw centrifugal fans to enable the hot air flowing at a higher velocity over the vehicle. As it turns out, the water is evaporated quickly from the surface of the painted times, thus accelerating the drying process while providing smooth paint surface.
The air acceleration system features air nozzles which are laid at a 45 degree angle on both sides inside the booth, enabling the heat to be distributed evenly over the vehicle. The uniform balance of air ventilation is guaranteed by adding two sets of air ducts placed below the upper lights on both sides, each set of duct has 20 vents and every 10 vents have a centrifugal fan.
Waterbrone Spray Booth For Show
By using a dedicated water-based paint spray booth, you can maximize the performance of your water-based paint products while prioritizing safety and environmental considerations.
GL paint booths installation